Saturday, December 31, 2011

Another quick one...

Another quick cup cozie I just finished before heading out to see the new year festivities.

Wednesday, December 28, 2011

First use

Using a new cup cozie for the first time. 
It occurred to me recently that having extras to keep in my purse or pockets would be useful, so I made several last night.  These are handy and quick little projects to experiment with.  For this one, I got to play with making diamonds, as well as figuring out how to adjust for increasing the size of the cozie at the top to better fit the cup. 
I think it turned out all right. :-)

Tuesday, December 27, 2011

Company

The kitten we are trying to find a home for likes my work station!

Saturday, December 24, 2011

Merry Christmas

Wishing you all a Joyous Christmas and a Happy New Year. May this time be one of peace and happiness, and may 2012 be a year of good health and prosperity.

Monday, December 12, 2011

Get Spicy

Ah, finally.  Some photos of this year's Christmas decorations!

This is not the project I originally intended to do, but lack of space in the kitchen for such a project left me searching for another option.  As I was going through Michaels one day, looking for inspiration, I decided to try something with these.


IMG_5737crop50%

Papier Maché forms, pre-strung for hanging.  Getting the bar code stickers off was a bit of an issue, but I hoped that would get covered over.

For the past few years, my annual decorations have leaned towards things that reflect light.  Beads, mirrors, metallics, craft gems and more, with the idea of having them reflect the lights on our tree.  This year I decided to go for more scent, and a more organic, natural look.  I still wanted a bit of shine, though.

With that in mind...

IMG_5741-50%

I also picked up a cheap package of craft brushes and some enamel paint in 8 metallic colours. I used a small jar (from some Devonshire cream... yum!) to hold the spheres while they were being worked on.  Not shown is some Tacky Glue that I picked up.  I had a definite need for a glue that would hold weight while wet, and would dry clear.

The first step was to cover the forms with the metallic paint.

IMG_5743-50%

I did two spheres and two stars in the same four colours, then the remaining forms in another four colours, starting off with just 2 colours.  I wanted to use the little yellow sponge on a stick that you see in the previous photo, but it didn't fit in the pots very well, so I used the black sponge, instead.  I used very little water and just one corner of the tip to dab the colours on, then used the try opposite corner of the tip to feather the edges, especially where the two colours met.  I tried to make the placement of colours look fairly random.  I also chose to dab with the sponge, rather than spread, as I wanted that hint of texture; another reason I used very little water.

IMG_5744-50%

While the first 4 forms dried, I worked on the next four.  The paint dries fairly quickly, though I did still need to give the first batch a few more minutes longer than it took me to finish the second batch.

IMG_5746crop50%

Once the first pair of colours were done, I did the next two colours.  With the spheres, I did need to give a couple of them time to dry on one side before I could finish the other.

Personally, I like the ones with green in them better then the ones with red.  At this point, I wasn't sure how much of the paint would even be showing when they were done.

IMG_5753-50%

Next up, some aromatic spices.  In the round little bowls are whole cloves and whole allspice on the left, and broken up cinnamon sticks on the right.  In the divided dish there's fennel seeds at the top and coriander seeds at the bottom.

I did two of the decorations myself, then the girls did the remaining six.  I started with a sphere, since I knew it would need drying time in between.

IMG_5755crop50%

I used an elastic to mark off guidelines at the equator for my first one.

IMG_5757crop50%

It didn't need to be perfectly straight; I just needed enough to make sure I didn't go all wonky while gluing.

IMG_5760crop50%

With this one, I had to do it in quite a few stages, staring with the whole cloves and lots of glue!

IMG_5797crop50%

This is the finished sphere with cinnamon pieces and coriander seeds with the cloves...

IMG_5799crop50%

While on the bottom, I chose one very large piece of allspice and surrounded it with 8 of the smallest allspice I could find.  As you can see, the glue still isn't completely dry in this photo, and this is after a full day and a half!  With the allspice being round, rather large, and being glued to a curved surface, I figured a lot of glue wouldn't be amiss! *L*

Here are the rest of them...

IMG_5761crop50%

I had just finished this one when I took the photo.

IMG_5764crop50%

My younger daughter did this one.  After taking the photo, I actually added more glue around the allspice pieces.  Just to be safe. *L*

IMG_5767crop50%

Another one by my younger daughter.  The other side matches this one, so that when hung, there's a single allspice in the centre of each side.

IMG_5781crop50%

One more done by my younger daughter.

IMG_5782crop50%

One of the spheres done by my older daughter.  She repainted the back so that it was all red.

IMG_5783crop50%

Getting a good shot of this one was rather difficult. *L*  Another from my older daughter, the back is actually blank.  It's done to look like the one side is bursting open to reveal the inside.  For this, she cut the allspice in half to have a flat surface to glue against the sphere.  Once glued in place and dry enough, she used some paint on them as well.

My older daughter also did a star shape, but for some odd reason, I don't have a photo of it!  I'm not sure how I missed it.  I did get this shot...

IMG_5794crop50%

Of course, there's another one in front of it. Oops. It's the middle one of the three stars.  After gluing on the cinnamon sticks and coriander, she added spots of paint as well.

I did get a picture of the other four finished decorations, but it didn't turn out.  I'll see if I can get more photos later.

When I first painted these, I'd left the backs of the stars unpainted.  I had thought to leave them that way, but the remains of the bar code stickers wasn't very nice, so once the glue was dry, I painted the backs.  For the ones with green on them, I painted the backs in the lighter gold while the ones with the red on them were painted with the darker gold.  For that part, I watered down the paint more and brushed rather then dabbed for a smooth and even surface.

We're all quite happy with how these turned out.  They were fun to do, easy and relatively quick.  Their scent is noticeable, but not overpowering.  Before Christmas, we'll pick up more forms and do others.  I seem to remember they had flat circles in stock. 

If you want to make your own version of these and time is a concern, do just flat pieces, as you won't have to do them in sections and wait for the glue to dry, the way we had to do with the spheres.  Other then that, they are really quick to do, and it's fun to try and figure out interesting ways to arrange the spices.

Monday, December 5, 2011

Gillian's Hat

Okay, it's finally done!  Some time ago, I got a custom order from one of my neighbours.  It took me way too long to get to it.  For those interested in my process in coming up with a custom design, this post is for you.

The goal: to make a hat with scarf flaps.  The hat had to have a custom fit, the scarf flaps had to have keyholes, and my neighbour had to be able to put it on herself by holding the scarf flaps and tossing it over her head.  It also had to fit over either a braid or ponytail.

Normally when I make a hat, I can just try it on my own head as I go along to make sure things are shaping up the way they should.  Since this was not an option for the hat I was making, I took a whole bunch of measurements.  I took far more than I probably needed, but better to have more information then not enough.

Working it out on paper

The notes written in a different direction are those I took when I first started working it up.

I also did a rough sketch of a variation of my basic hat with scarf flaps located over the ears.

Working it out on paper

I started experimenting with a mock up version using two strands of Bernat Satin on a 6.00 mm hook. 

Working it out on paper

I also did a couple more sketches of possible variations.  As I worked the mock up to the measurements I had, the design started looking a lot more like a tam than the sort of hats I usually do, so I figured that was something I could run with.

After I worked up the first mock up, I tried to test it myself by holding my elbows close to my sides and trying to toss it over my head.  The hat just flopped into itself and, no matter how I wiggled the scarf flaps, would not position properly on my head.  I took it to Gillian to test it out, in case it would work better for her, but it clearly was not going to work.  It was a total flop.  Literally.  Unfortunately, I neglected to take photos of this first mock up, but it wasn't too far from the diagrams I sketched out.

One thing became very clear when Gillian tried the hat on.  It wasn't a really hat we were after, but a hood.  Time to take a few new measurements and go back to the drawing board! 

Working it out on paper

I already had most of my measurements to work with, but the position of the scarf flaps in relation to the hood changed things a bit, including where to put the keyholes.

I did the mock up with a 6.00 mm hook and two strands of yarn again.  I needed to use a stitch that would make for a denser fabric that would hold itself up to a certain extent, yet still be flexible and comfortable to wear.  I decided to work in front and back post double crochet stitches.  In comparing the Bernat Satin to the Paton's Silk Bamboo the final hat would be made out of, I knew I would need to reduce the hook size, and perhaps work with 3 strands on the hook instead of 2.  Here is how the mock up turned out.

Mock up

I had originally intended for this to be the outside of the hat, though I figured it would also be reversible.  When this side was out, however, I noticed it lay very flat, which I could see as being a potential problem when putting it on.  Flipped the other way, however....


Mock up

... and the post stitches helped keep the hat slightly open.  I felt it looked attractive either way, so switching made little difference. 

At this point, I didn't even try to put in the keyholes.  I just wanted to make sure Gillian could put it on.  This time, it worked.  Through the size and measurements on the mock up were off, she was able to put it on. 

Working it out on paper

With my new measurements verified, I fleshed out my design sketch with more detail and got started on the final version in the Patons Silk Bamboo.  I knew I wanted to go down a hook size, but wasn't sure if I'd increase the number of strands on the hook, too.  I ended up sticking to two strands on a 5.50 mm hook.

final-start-2

I started off with a foundation chain slightly shorter than the length I needed, as an edging would be added later, then worked a few increase rows to get it to the measurement I needed.  After that, it was just basic front or back post double crochet stitches, starting and ending each row with a half double crochet stitch.

I worked the hood portion, then the scarf flaps (more details later), until I was almost ready to do the keyholes.  At that point, I wanted to double check my measurements and see how it would fit on Gillian.

Final version - before keyholes were added.

Here's the side view.  The edge of the hood is rolling back on itself quite a bit, which gets fixed with the edging, and at this point, she could not put it on by herself. There just wasn't enough substance to the scarf flaps yet.  I double checked the length at the back to verify how wide the scarf portion would need to be in total, which also told me how many more rows I'd need to do before working the keyholes.

Final version - before keyholes were added.

Here I've verified and marked where the keyholes were going to go.  The width of the scarf portion would also determine how large the keyhole openings would need to be.  I just had to make sure the centres of the keyholes were at my marks.

I was slightly concerned that it would not hold itself open properly when she tried to put it on.  The Silk Bamboo has a completely different drape then the Bernat Satin I used for the mock up.  I did expect that, but it was also turning out much heavier than I expected.  I was thinking that the hat would collapse under its own weight while being flung over and ending up bunched up behind her head instead.  I started to brainstorm some way to add something to the hat later on that would force the hat to stay open, while still being flexible enough to be comfortable, and to bend when the scarf was pulled tight.  I wouldn't know if that would be needed until it was done, though.

Time to finish the hat.


final-body-inside

Here is the view from the inside, before the edging was done.  When the hood portion got to the size I wanted and I started on the scarf portion, I switched from working post double stitches to half double crochet stitches.  This made the scarf portion thinner and more flexible than the hood portion.

To work the scarf flaps, after finishing the last row of post stitches, I did a foundation chain of 50 stitches, then worked hdc into the foundation chain and around the bottom of the hood.  For the opposite flap, I worked 50 foundation half double stitches

Final version - before keyholes were added.

Here is what it looked like on the outside, with that curling edge waiting to be finished.  The first and last stitch of each post row is a half double stitch instead of a post stitch to make working the edge easier.  I planned to work one edge stitch into the side of each hdc which, due to the height of the hdc stitches, I knew would cause it to cup slightly. I wanted it to be pulled in a bit to increase facial protection.

Finished

A view of the keyhole openings.  These were done by working foundation half double stitches.  As the scarf portion worked out to be a total of 8 rows of hdc stitches, plus the edging, I made the keyhole openings 10 stitches wide.

Time to work the edging.

Finished

Here's how the edged scarf portion fit through the keyhole.  Slightly snug, with no gaps.  For the edge, I worked single crochet around the edges of the scarf flaps, the base of the hood portion, and part of the hood opening.

Finished

The corners were turned with a [1sc, 1ch, 1sc].

Finished

To extend the top of the hood slightly, the front of the hood was edged with a few stitches of sc at the bottom, then a few hdc, then joined dc stitches across the top, then matching numbers of hdc and sc back to the scarf portion.

I tried to find a link to explain what a joined dc stitch would be, but can't find one, so I'll do my best to explain it here.  It starts with a dc worked as normal.

Yarn over hook (yoh)
insert hook into designated stitch (in this case, around the post of an hdc stitch in the hood)
yoh and draw loop through (3 loops on hook)
yoh and draw through 2 loops (2 loops on hook)
you and draw through 2 loops (1 loop on hook)

To work joined dc

insert hook under one strand of yarn in the post of first dc stitch worked
yoh and draw loop through (2 loops on hook)
insert hook into next designated stitch (around the post of next hdc stitch in the hood)
yoh and draw loop through (3 loops on hook)
yoh and draw through 2 loops (2 loops on hook)
yoh and draw through 2 loops (1 loop on hook)

This will leave a distinctive horizontal bar joining the two stitches.  To work the next joined dc, insert hook under this horizontal bar.
yoh and draw loop through (2 loops on hook)
insert hook into next designated stitch
yoh and draw loop through (3 loops on hook)
yoh and draw through 2 loops (2 loops on hook)
yoh and draw through 2 loops (1 loop on hook)

In essence, what is being worked here is a really, really short Tunisian simple stitch, if that helps make any more sense.

After finishing the hat, I tested it out again on myself.  Remember my concern about the hat not staying open while being tossed into position?  How I was concerned that, between the weight and the drape of the yarn, it would just collapse on itself?

The exact opposite is what happened!  When I tossed it up, the hood portion just opened right up and it landed perfectly in place!  I did it again, several times, just to make sure it wasn't a fluke, and it was perfect every time!

Time for Gillian to try it out!

Finished

Check it out!  It worked perfectly for her as well!  She had her hair in a ponytail that day, and it fit easily over it.  The denser post stitches help hold the shape while the softer hdc stitches in the scarf portion make for more flexibility at base of her head and neck.

Finished

She was also able to put the scarf end through the keyhole and pull it tight without any problems.  A keyhole in each flap makes it reversible for her, too.  The edging tucks in around her face for extra protection against the wind, just as I hoped it would.  I am so tickled with how well it worked out!  Her choice of yarn was perfect for this.  Though the Bernat Satin I used for the mock up would also have worked, it would not have worked as well as the Silk Bamboo did.

Most importantly, Gillian is happy with her new hat, too. :-D